This mount fits the GoPro MAX. All buttons and the screen are accessible when mounted. The camera is 55mm raised to have less of a seam where the 360 image welds together. Pitch the camera forward and back and adjust it to your personal angle and needs. The mount comes with all the bits to screw or to stick with original 3M double sided VHB sticky tape. The mounts low profile base sticks with 3M or with 2 x 4mm screws to your helmet shell. Due to the weight and the value of the camera we don't recommend using the sticky tape.
The camera case screws to the LPS base (included).
In case you are switching a standart GoPro camera (that you have mounted with a LPS mount) with the MAX, you use the identical LPS base. All you have to do is switch the camera casings of the mounts.
As standard the LP-MAX mount comes in BLACK.
The mount is light weight and snag free.
When jumping without camera or flying in the wind tunnel, the casing disconnects easily from the LPS base by releasing 2 srews. If the mount is screwed the complete mount can be removed from the helmet quickly.
